ClearView IP-PTZ-IR-988-IR, Руководство по установке

Страница: 16 / 29

8
Step 1: Dig holes
Draw the installation holes in the wall according to the holes at the bottom of the connection plate.
Dig the installation holes. Insert the expansion bolts into the holes. (Please note the expansion
bolts are not included in the accessories bag.). See Figure 2-2.
Step 2 Components installation
Fix the bracket connection plate to the ceiling and then turn the straight pole to the connection
plate. Turn the adapter block into the straight pole of the bracket. See Figure 2-5.
Figure 2-5
Step 3: Connect cable and the speed dome.
Connect the safety rope of the speed dome to the safety rope hole of the adapter block. Now you
can connect the cable: video, RS485, power (network, alarm, audio are optional). Please refer to
Figure 1-5 for cable connection information. Please note the cables listed in the Figure 1-5 is for
reference only.
Use the quick installation screws of the speed dome and the quick installation port of the adapter
block to fix the speed dome on the adapter block. Finally, you can use the M6 inner hex screws
to secure the speed dome firmly. See Figure 2-6.