9
CLEARSPAN
™
POLY BUILDINGS
Revision Date: 03.13.08
4. Assemble a rafter foot base using one (1) 3.25" pipe
fitting (#105092) and one (1) base (#105241). Connect
the pipe fitting and base using carriage bolt, nut, and
washer.
Do not tighten at this time.
NOTE:
Align the pipe fitting with the foot base as
shown in the insert above.
5. Insert one (1) assembled rafter foot into the rafter and
secure it using (1) one ½" x 5½" bolt and two purlin
connection brackets positioned as shown.
6. In the hole closest to foot base, secure the foot to rafter
using a ½" x 4 ½" bolt. See insert above.
ATTENTION:
Install all brackets and bolts so they do
not interfere with the installation of the main cover.
To
protect the cover, tape all rafter joints with duct tape.
7. Repeat Step 4-5 for the remaining rafter foot.
8. Complete this entire procedure to assemble all
remaining interior rafters. (See Page 6 for assembly
suggestions.)
½" x 5½" Bolt
½" x 4½" Bolt
Rafter
Purlin
Connection
Bracket
RAFTER ASSEMBLY (CONTINUED)
FRAME ASSEMBLY
Gather the parts:
• All rafter assemblies
• Purlins (#107618)
• 3/8" x 1" bolts and nuts
Frame Assembly Procedure
After all rafters are constructed and placed in an orderly
fashion for frame assembly, proceed with standing
the first end rafter. Forklifts and personnel booms are
recommended for lifting and setting the rafters. Consult
a construction professional if you are not familiar with
construction techniques and erecting similar structures.
ATTENTION:
Use the proper lifts. Rafter assemblies are
heavy and awkward to handle.
Placing a baseboard beneath the feet of the rafters is
strongly recommended. The feet then can be secured
to the baseboard using the customer-supplied lag
screws or similar fasteners. Baseboard can be treated
or recycled plastic lumber. Contact Customer Service at
1.800.245.9881 for additional information.
1. Stand the first end rafter and stabilize it using rope,
cable, or some other form of temporary bracing. Use a
level (or other leveling device) to plumb the end rafter.
Use a lift to support the rafter as it is set in place.
42' on-center
NOTE:
Verifying that the end rafter is level and straight
at this stage assists in setting and connecting the
remaining rafters.
Customer-
Supplied
Baseboard
Rafter Foot Base (#105241)
105371
Carriage Bolt
Pipe Fitting
(#105092)
FALB08B
Nut
FAMA40B
Lock
Washer
