CLEARSPAN
™
VALUE LINE
16
Revision date: 10.05.10
PREPARE END PANELS
CAUTION:
To prevent damage, do not install end
panels on a windy day.
Gather the parts:
• End panel solid (plain)
• End panel 3-zip (zippered)
• End conduit assemblies (2)
• QH1330 Angled brackets
• Tek screws
Assembly Procedure:
1. Locate the end panels, unfold each panel at the base
of the assembled frame (where they will be installed)
with the inside surface facing up.
2. On the zippered end panel, insert the end conduit
through the two side panels of the end panel (as shown
below) and not through the door sections.
End Conduit
through Side
Panel
End Conduit
through Side
Panel
3. Slide the remaining end conduit assembly into the hem
at the bottom of the solid (plain) end panel.
4. Continue with the next procedure.
ATTACH END CONDUIT ASSEMBLIES
1. Using two (2) QH1330 angled brackets, secure one
(1) angled bracket to each end of the end conduit and
secure the conduit to the legs of the end rafter. See the
following diagrams.
2. Repeat the steps for the remaining end panel.
3. Attach the end panels to the end rafters as described in
the next procedure.
End Conduit
Customer-Supplied
Baseboard
Angled Bracket
Installed with
recommended
baseboard.
End panel not
shown.
Installed without
baseboard.
End panel not
shown.
Angled Bracket
End
Conduit
