VIEW LITE DJ100 DECODER
4
A.
LED
»
Power: Solid red indicates the unit is powered on.
»
Status:
•
Off (no light): Unit powered off, or in the boot process.
•
Blinking blue: Unit is disconnected from the EJ100 or
an active video source, or the network is down.
•
Solid blue: Unit is connected to the EJ100 and a video
stream is displayed.
B.
Mode Switch
: Set the mode for the RS-232 function. Under
the default Normal Mode, a RS-232 connection enables serial
command control of display or 3rd-party devices. Under Debug
Mode, it enables debugging.
C.
DIP Switch
: Routes audio and video together with IR, and USB
signals between DJ100 and EJ100 units. To route video from
a particular source to display, toggle switches on the DJ100 to
match the positions on the chosen EJ100. To unlink a DJ100
from an EJ100, reset the DJ100 factory defaults.
NOTE:
Before using the DIP switch, check that routing operations
are not performed by other tools. If they are, the switch function is
disabled. Press and hold the Reset Button to enable the switch.
D.
USB Type A Ports
: Connectivity to a PC, MAC, or laptop for
USB HID (KVM) functionality.
CONNECTING THE DJ100 DECODER
VIEW Lite DJ100 Front Panel
2 x USB 2.0 Ports
Power LED
Indicator
Status LED
Indicator
Mode
Switch
DIP
Switch
VIEW_Lite_DJ100_QSG.indd 4
8/23/2018 12:48:31 PM