UNITE® 10 Webcam
2
QSG-0127-001 V1.0
January 2022
1. Connect the USB
Connect USB cable to Laptop or PC port.
2. Driver installation
Driver will automatically install, with status shown at lower right of screen.
Once installed, prompt will show camera as ready to use.
3. Troubleshooting
a. No display
•Check that driver is properly installed through your computer’s Device Manager menu
b.Device is not detected
•Verify the USB connection between device and PC
•Disconnect and reconnect USB device to PC or try another USB port
Care and Maintenance
Packing List
Carefully inspect the shipment. If the shipment shows obvious signs of damage, retain the box and packing material for
inspection by the carrier. Contact the carrier immediately.
ClearOne is not responsible for product damage incurred during shipment.
Camera
Quick-Start Guide x 1
