ClearOne NetPoint Firewall Traversal, Инструкция по установке и настройке, Страница: 25 / 35

NetPoint Firewall Traversal Server: Installation and Setup Manual 25
Chapter 6: Using NetPoint
IN THIS CHAPTER
This chapter covers NetPoint usage, and includes the following sections:
 Unpacking and Connecting NetPoint Server

Logging in

Main Screen
 Administrators

Network
 License

Log Out

Shut Down

Restart

Backup / Restore
UNPACKING AND CONNECTING NETPOINT SERVER

Unpack and connect the NetPoint server to the Internet.

Configure an IP address for the NetPoint server from the NetPoint Admin page network
tab or by using cross cable.
A
SSIGNING
S
TATIC
IP A
DDRESSES TO
N
ETPOINT
S
ERVER WITH
DHCP A
DDRESS
This procedure describes how to set a static IP Address when Netpoint is connected to the
network, and has acquired a DHCP address.
From a remote computer connected to the network, connect to the Netpoint configuration
application using an IE web browser.
C
ONFIGURING
N
ET
P
OINT
S
ERVER VIA
N
ET
P
OINT
A
DMINISTRATION
I
NTERFACE
1. Connect the network cable to GBE1.
2. Connect the VGA monitor and configure an IP address for the NetPoint server. Start
your IE browser and point it to the NetPoint admin configuration screen at [IP
address]/admin. The default user name/password is
admin/admin.