ClearOne NetPoint Firewall Traversal, Инструкция по установке и настройке, Страница: 17 / 35

NetPoint Firewall Traversal Server: Installation and Setup Manual 17
Chapter 4: Configuring NetPoint in Collaborate Central
IN THIS CHAPTER
When your organization purchased a NetPoint solution, it received an installed, pre-
configured system of NetPoint products. If it becomes necessary to change settings later on
(such as a running of the NetPoint recovery option), you will have to reconfigure the system.
This chapter and includes the following sections:
 Configuration

Verifying NetPoint status
 QoS
CONFIGURATION
To configure NetPoint in Collaborate Central:
1.
Log in to EVCAdmin ([IP Address]EVCAdmin. The default user name is su, and the
default password is 1234.
2. Select NetPoint->Settings->Configuration.