ClearOne NetPoint Firewall Traversal, Инструкция по установке и настройке, Страница: 18 / 35

18 NetPoint Firewall Traversal Server: Installation and Setup Manual
3. Enter the NetPoint IP Address. All other parameters are configured to default values
automatically. If you have no special reason to change them, leave the default values
and click Apply.
4. After you enter the NetPoint IP address, verify that Connection Status is “Connected”. If
the status is still “Disconnected”, do the following:

Verify the NetPoint IP address; If the address is correct and in the Advanced tab
click Restart NetPoint.
5. If you decide to change the Outbound TCP Signaling Port before establishing the
connection with NetPoint, you have to click on the Management Pages button, and
change the port number in the NetPoint configuration page accordingly.
P
ARAMETERS
D
ESCRIPTION
Name Description
Name Identity of the server. This name appears in the Main View.
NetPoint IP Address IP address of the server.
Management Pages This button opens the NetPoint Home Page in the NetPoint tab. This tab is
practically the same as the current screen, allowing you to manually
synchronize the Outbound TCP Signaling Port with Collaborate Central.
The NetPoint Admin web application includes several additional tabs, which
are similar to the tabs of EVC Admin (License Server, Network, Administrators,
Restore and Upgrade).
Connection Status Displays the status of the current connection.
Maximum Bandwidth Set up the total bandwidth that the local Collaborate Central allocates to all
calls routed through the NetPoint.
Maximum Calls Set up the maximum number of calls that may be routed through the NetPoint
at the same time (in both directions). The number of calls cannot exceed the
number of calls allowed by your license (indicated below the field).
Calls license limitation Number of concurrent calls you can make according to your license.