INTERACT Pro 8i
DATA SHEET
<
>
INTERACT Pro 8i REAR PANEL
>
SPECIFICATIONS
>
CLEARONE LOCATIONS
© 2013 ClearOne. All rights reserved. Other product names may be trademarks of their respective owners. Information in this document subject to change without notice. 802-000-028-02-DS Rev. 2.9 August 2013
AUDIO PERFORMANCE
Conditions: Unless otherwise specified, all
measurements are performed with a 20 Hz to
22 kHz BW limit (No Weighting)
Frequency Response:
20 Hz to 22 kHz BW, Max Gain
Noise (EIN):
-124 dBu, 22 kHz BW, Max Gain, Rs=150 Ω THD+N: < 0.02%
Dynamic Range: 100 dB (non A-weighted)Crosstalk < -91 dB rel
17 dBu
Sampling Rate: 48 kHz
A/D - D/A Converters: 24-bit
MICROPHONE INPUT CONFIGURATION
Input Gain Adjust
Mic or Line Level
Phantom Power ON/OFF
Echo Cancellation ON/OFF
Noise Cancellation ON/OFF
PEQ
Filters
Mute ON/OFF
Chairman Override ON/OFF
AGC ON/OFF
Automatic Level Control ON/OFF
Auto Gate/Manual Gate
Adaptive Ambient ON/OFF
Pre-AEC Channel
MIC/LINE INPUTS 9-16
Impedance:
5 kΩ per Leg or 10 kΩ Balanced
Maximum Level: -65 dBu to +17 dBu
Echo Cancellation:
128 ms Tail Time (Works with 12 dB of Room Gain)
Phantom Power: 24 VDC at 10 mA
RS-232 CONTROL PORT
Firmware updates only
EXPANSION BUS IN/OUT
Cable:
CAT5 Twisted Pair, Solid Conductor
Maximum Cable Length Between:
INTERACT Pro and INTERACT Pro 8i:
80 feet
INTERACT Pro/Pro 8i and INTERACT COM:
60 feet
CONFIGURATION SOFTWARE
INTERACT Supports:
Microsoft XP, Vista and Windows 7
INTERACT COM (OPTIONAL)
VERSIONS:
Wired or Wireless (2.4 GHz)
USB AUDIO CHANNEL IN/OUT
:
USB 2.0 Compatible
Connector: Mini Type B
IN/OUT Channel, 16-bit at 16 kHz
HEADSET AUDIO CHANNEL:
Connector
: RJ-9
Supported Telephone Sets:
Most Cisco, Avaya and Nortel phones
Audio Performance:
Frequency Response: 40 to 3300 Hz
THD and Noise: < 0.04% re-max level with
0 dB Gain @ 1 kHz
Dynamic Range: > 84 dB (non A-weighted)
Audio Processing:
Receive Automatic Level Control
Line Echo Cancellation for Side-tone Elimination
GPIO:
Pin 1
: Global Mute (C)
Pin 2
: Global Mute (S)
Pin 3
: ON/OFF Hook (C)
Pin 4
: ON/OFF Hook (S)
Pin 5
: 5V DC up to 40 mA
INTERACT DIALER (OPTIONAL)
Functions: Dialing, Volume Control, Mute Control
Communications:
Wired Version: RS-232 Connected to Mixer
Wireless Version: 2.4 GHZ DSSS to INTERACT COM Wireless
POWER SUPPLY
Primary Voltage: 100 to 240 VAC
Auto-Sensing, 50-60 Hz
Power Consumption: 26 W Max
DIMENSIONS (W X D X H)
INTERACT Pro 8i: 17” x 7.5” x 2”
(43.2 cm x 19.1 cm x 5.1 cm)
WEIGHT
INTERACT Pro 8i: 4.5 lb. (2.25 kg)
COMPLIANCE
ROHS Compliant
WEEE Compliant
UL Safety Listed
AES48-2005 AES Standard on Grounding and EMC Practice
PART NUMBER
910-154-065
NOTE: THE INTERACT PRO 8i IS AN INPUT EXPANSION DEVICE FOR THE INTERACT
PRO. AN INTERACT PRO IS REQUIRED FOR THIS DEVICE TO FUNCTION.
HEADQUARTERS:
Salt Lake City, UT USA
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Tel:
801.975.7200
Toll Free:
800.945.7730
Fax:
801.977.0087
e-mail:
EMEA
Tel:
+44.1454.616.977
e-mail:
APAC
Tel:
+011.852.3590.4526
e-mail:
LATAM
Tel:
801.974.3621
e-mail:
TechSales
Tel:
800.705.2103
e-mail:
Technical Support
Tel:
800.283.5936
e-mail:
