52
Technical Support: 800-283-5936
PRESETS - INTERACT Pro
Presets for an entire device configuration can be saved for the INTERACT Pro (maximum of 4). Presets
save the configuration currently running on the INTERACT Pro. When the Preset is run it re-configures every
setting on the unit.
Settings not saved to a Preset include: Network, RS-232, Phonebook, Regional, ON/OFF Hook State of
Telco, Telco Configuration Properties and Meter Activation.
Saving a Preset
1. Make all changes to your configuration you want included in the Preset.
2. In the Flow Control, click
Presets
3. Enter a
Name
into one of the available slots
4. Click
Save
to store the current configuration
5. Click
Yes
to confirm saving or
No
to cancel
6. Click
Close
to exit the Preset window
Running a Preset
1. In the Flow Control, click
Presets
2. Click the
Run
button which corresponds to the preset you wish to load
3. Click
Close
to exit the Preset window
DIALER - INTERACT Pro
In addition to the INTERACT Controller, you can manage calls through the Dialer in INTERACT Software. You
can dial a number, redial the last dialed call, and disconnect calls. You can also use hook flash function,
mute the microphones, adjust call volume and change between Telco and PC modes.
Making and Receiving Calls
o
pen
The
d
ialer
»
NOTE
: A connection must be present for the dialer to work on the AT. A connection is not
necessary for the INTERACT Pro.
•
Click the
Dialer
icon on the flow window.
M
ake
a
C
all
1. While connected to an active phone line, click the
ON/OFF
key. You will hear a dial tone.
2. Dial the number as you would on a standard phone. The number appears on the LCD screen as it dials.
»
NOTE
: You can also pre-dial the number and then press the
ON/OFF
key to connect the call.
Press and hold the pound key (#) to enter a pause in the dialing string.
Содержание interact at
Страница 1: ...INTERACTTM Pro Pro 8i AT User s Manual...