20 COLLABORATE Room: Installation and Setup Guide
CONNECTING (FHD EXAMPLE)
Connecting the cables and peripherals is done as shown in the following graphic which
visually presents all required connections.
In order to connect the COLLABORATE Room to its peripherals, follow the schematic
diagram (located on the back side of the guide) going from the left side.
You can identify each peripheral by matching the number on the cable with the numbered
picture on the front of the document.
The diagram contains the optional modules in addition to the basic option. If you did not
purchase any of the optional modules, please ignore those sections.
To connect the optional modules, after assembling the main unit, assemble the optional
module and finally connect it to the main unit.
NOTE: Connect the unit to the electricity only after all peripherals
are connected
x>
