QUICK-START GUIDE
3
QUICK-START OVERVIEW
Installing and using the BMA CT arrays in your CP2 site is subject to the
following parameters:
1. The arrays can only be used with CP2 systems.
2. You must have a 128, 128D, 128T, 128TD, 128V, 128VD, 128VT,
128VTD, 120, 48T, 48VT, 48VTD, and/or 48V. mixer in the site. The
arrays will not work with standalone 012, 128SR, or 128SRD units.
3. Connect up to 3 arrays (current) per CP2 unit, and up to 6 arrays
per Regular P-Link chain with 2 CP2 unit stack. More CP2 units may
be added to increase the number of arrays per site.
Q
uick
-S
tart
P
rocedureS
These steps must be done in the following order to use the BMA CT in
your CONVERGE Pro 2 site:
1. Update the CONVERGE Pro 2 firmware to the latest version using
CONVERGE Pro 2 CONSOLE software.
2. Connect the array to the updated CONVERGE Pro 2 via the P-Link
bus.
3. Update the array firmware using CONVERGE Pro 2 CONSOLE.
(The array firmware can not be upgraded without an updated
CONVERGE Pro 2.)
4. Test the array.
5. Mount the array.