WALL MOUNT INSTALLATION GUIDE
Wall Mount Installation Guide 13
Move the Beamforming Microphone Array forward onto the Wall
Mounting Plate with the studs passing through the slotted keyholes. Then
slide the assembly down slightly to firmly seat the studs into the tops of
the slots. If the cables are outside of the wall, carefully route them to the
mixer to avoid tangling or hazard.
Use slotted keholes in Mic Mounting Plate
to hang Beamforming Microphone Array
on Ceiling/Wall Mounting Plate
LINK IN and LINK OUT
Connectors
PoE Connector
Pass LINK IN, LINK OUT and PoE
cables through plates and
under Cable Retention Clips
Carefully route cables to the
mixer to avoid tangling or hazard.