ClearOne AP10 Скачать руководство пользователя страница 32

Appendices

~ Appendix D: Warranty

28

Technical Services Group 

~ 1-800-283-5936 (USA) ~ 1-801-974-3760

ClearOne Communications, Inc. (Manufacturer) warrants that this product is

free of defects in both materials and workmanship. Should any part of this

product be defective, the Manufacturer agrees, at its option, to:

A.  Repair or replace any defective part free of charge (except transportation

charges) for a period of one year from the date of installation for the end-

user, provided the owner returns the product to the Manufacturer at the

address set forth below. No charge will be made for parts or labor during

this period;

B.  Furnish replacement for any defective parts in the product for a period of

one year from the date of original purchase. Replacement parts shall be

furnished without charge, except labor and transportation.

This Warranty excludes assembled products not manufactured by the

Manufacturer whether or not they are incorporated in a Manufacturer product or

sold under a Manufacturer part or model number.

THIS WARRANTY IS VOID IF:

A.  The product has been damaged by negligence, accident, act of God, or

mishandling, or has not been operated in accordance with the procedures

described in the operating and technical instructions; or,

B.  The product has been altered or repaired by other than the Manufacturer or

an authorized service representative of the Manufacturer; or,

C.  Adaptations or accessories other than those manufactured or provided by the

Manufacturer have been made or attached to the product which, in the

determination of the Manufacturer, shall have affected the performance,

safety or reliability of the product; or,

D.  The product’s original serial number has been modified or removed.

NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE, APPLIES

TO THE PRODUCT. MANUFACTURER’S MAXIMUM LIABILITY HEREUNDER

SHALL BE THE AMOUNT PAID BY THE END-USER FOR THE PRODUCT. No

person or entity authorized to assume any obligation or other liability in connection

with the products. No action, regardless of form, arising out of or relating to the

product or this Warranty, may be brought by end-user more than one (1) year after

the cause of action has accrued.

Appendix D: Warranty

Содержание AP10









































Отзывы: