Sealing the Shower
IMPORTANT: DO NOT apply sealant to the inside of the shower
17)
For White Showers only - take the Cleaning
Towele e and wipe the surfaces of the
Powder coated profiles where Silicone will
be applied Allow to dry (1-2 minutes)
18)
The Door can now be sealed in place using
silicone sealant. Ensure all surfaces are first
cleaned with dry clean cloth. Seal between
the tray upstand and the door set along the
bo om outside edges. Seal ver cally be-
tween the Wall Receivers and Wall Liner
Note MASKING the area to be Sealed will result
in a superior finish
19)
Cover Trim– (selected models only)
The Cover Trim is provided to cover the exposed ver cal edge of
the wall liner and is the final step of the installa on. For some
installa ons the Cover trims may require cu ng to length
To fit the Cover trim apply small ver cal beads of silicone down
the Wall Receiver and the exposed wall lining outside of the Wall
Receiver. Embed the Cover trim into the silicone. If the liner ex-
tends more than 10mm it will need to be trimmed prior to fi ng
the Cover Trim
22)
Your Shower is now complete. Allow
the Sealants to cure for a minimum of
24 hours
