7
FieldSmart
®
Fiber Entrance Cabinet (FEC)
__________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 019612 REV B - Aug 2018
After all cables are routed in the correct direction and there is an adequate
amount of slack in the cabinet, the cable tie down locations can be marked with a
permanent marker.
Splice trays (P/N 019339) will be shipped with 2 standard splice chips and 2
ribbon splice chips, allowing for a total of 24 loose tube splices or 6 ribbon mass
fusion splices (72 fibers). Splice chips will need to be bent into place in the empty
slots in the center of the splice tray.
Note:
Each standard splice chip features 6x2 splice sleeve slots, allowing for
12 splice sleeves to be stacked 2 high in the 6 slots. Each ribbon splice chip
features 3 ribbons splice sleeve slots, as well as one 2 high loose tube splice
sleeve slot for use in special applications or repairs.
Splicing
Splice Chip
Ribbon Splice Chip
Bending the Splice Chip
Splice Tray Loaded with
2 Splice Chips
Splice Tray Loaded with
2 Ribbon Splice Chips
