Clearaudio Innovation Compact Скачать руководство пользователя страница 13

User manual

Made in Germany 

 

 

 

Page 13

4. Fine adjustment of the 

Innovation Compact

 motor

The motor adjustment is already pre-set at the factory. Through the transport some small speed 

deviations can occur. Please check the speed before using the turntable for the first time.

For the correct adjustment of the speed please put the recommended Clearaudio 

Stroboscope 

Testrecord

 on the platter. Follow hereby the instruction of the 

Stroboscope Testrecord

 user manual. 

To check the speed with highest accuracy please use the Clearaudio Speed Light (Art. No. AC039) 

(

www.analogshop.de

).

On the front side of your turntable there are three setting trimmers (see pic. 11).

Pic. 12: Fine adjustment of the motor (on the frontside)

- Left trimmer = setting 33 1/3 rpm 

  (near turntable motor)

- Middle trimmer = setting 45 rpm

- Right trimmer = setting 78 rpm 

  

(near turntable bearing)

 

If you like to adjust the speed 33 1/3 rpm, take the Aluminum screw driver (see accessories) and 

turn the left trimmer until you have reached the right speed according to the Stroboscope Testrecord 

(see user manual 

Stroboscope Testrecord

).

Turning the trimmer counter clockwise = reduces the turntable speed

Turning the trimmer clockwise = raises the turntable speed

Please proceed with the speed adjustment for 45 rpm and 78 rpm in the same way!

Please note:

If the turntable does not reach the correct speed, the sensor or the scale ring could be dirty or dusty. 

To clean the sensor, please take off the platter very carefully! 

Clean the sensor and the scale ring with a little isopropyl alcohol and a cotton bud.

Be careful and avoid any scratches on the sensor or the scale ring!

If the motor has further more speed variations please contact your nearest authorized Clearaudio 

dealer or directly the Clearaudio factory (address on page 13).

If the turntable is not in use, disconnect the unit completely from the power supply by removing the 

main plug from the socket. 

Now you are finally ready to play your vinyl records.

We wish you a lot of pleasure with your new 

Innovation Compact

 turntable. 

Содержание Innovation Compact

























Отзывы: