20
Cannot pair with a Bluetooth device
Ř
Make sure Clio is in pairing mode (discoverable). Press and hold the Source
Selection button for three seconds until the status light blinks blue.
Ř
Make sure to select Clio in the Bluetooth list on your device to connect.
Ř
Make sure Bluetooth is turned on in your device.
Ř
Your Bluetooth device might be out of range – try moving it closer to Clio.
Ř
When connecting to Mac or PC computer, select Clio as the audio output
device within the audio settings menu of the computer. You may need
WRSOD\DQDXGLRWUDFNWRƓQDOL]HWKHFRQQHFWLRQ6HHWKHFRPSXWHUōV
documentation for detailed instructions.
No audio from wired source
Ř
Make sure your connected device is on and playing.
Ř
Make sure Clio is plugged into an electrical outlet and the status light is on.
Ř
Make sure the status light on the front of Clio is red. If not, switch the
source using the Source Selection button on the right-hand side of the
speaker’s base.
Ř
If your device is battery powered, make sure the device is charged up.
Ř
Make sure that the volumes on both Clio and your device are turned up.
Ř
Make sure the 3.5 mm cable is fully inserted into the jacks on both your
Clio and your device.
Ř
Unplug Clio for 10 seconds and then power it back up.
Ř
Check the 3.5 mm cable to make sure it is not broken or frayed.
Poor sound quality from a Bluetooth device
Ř
Your Bluetooth device might be out of range – try moving it closer to Clio.
Ř
Move your Bluetooth device and / or Clio away from other devices that
generate wireless interference. Examples are cordless phones, microwave
ovens, wireless network routers, or other Bluetooth or wireless devices.
