8
Control Panel
Remote Control Instruction
Install Batteries
1. Open back cover of battery component on the back of remote control.
2. Install AAA type battery according to the corresponding electrode, make sure battery positive and negative
pole are correct (“+”to”+”, “-” to “-”), please do not mix using old and new batteries.
3. After battery is installed, close the back cover of battery components, and make the following clip buckled to
the bottom.
Range of remote control
Remote control can work normally within the range of
8 meters distance, 30 degrees left and right from the
remote-control receiver.
Please dispose of waste battery into a
recycling box.
If the battery is replaced by an incorrect type,
it may lead to explosion.
