manualshive.com logo in svg

Clear jet CX-one, Руководство пользователя

Поделиться
Скачать
Clear jet CX-one Скачать руководство пользователя страница 36

CLEARjet GmbH

 

 

CX-one

 

7 DIRECTION 

DETECTOR 

7.1 Functionality 

 
The module 'direction detector' serves to determine the card position in the printing unit. 
Cards that are inserted the wrong way around are recognised and printing on the wrong 
side of the card can be avoided. 
The direction detector works with a reflective light sensor. The position and distance of 
black marks on the card are measured. The application program interprets this 
measurement and decides whether or not the card is in the correct position.  
 

Reading Position 

The light sensor for direction detector is built-in at the right bottom side of the printer. 
Thus the card must be inserted into the printer with the direction marking ahead (on the 
right, bottom side of the card).  
(The TRW print is always carried out on the top side of the card) 

 

7.2 Processing 

 

A maximum of 4 markers are measured. Each measurement value is the distance 
between the card edge and the centre of the current marker.  
If fewer than 4 markers are present, the measurement value of the absent markers is 
set to 0. The resolution is approx. 0.2 mm. (1 mm 

≅

 unit value 5.) 

Due to variation, the measurement values of a card can deviate from the standard by 
+/- 3 units. In addition, cards are usually subject to further manufacturing variations. 
When analysing the measurements in the application program, care should be taken to 
allow an adequate tolerance range for each value. 
 

7.3 Card Design 

 

The function of the direction detector is based on the comparison of the position of 
optical markings with the debit value in the software. In order for this activity to work 
reliably the following must be assured when the card is designed:  
The markings in the diagonally opposite edges of the card must be designed in such a 
manner that printing in this area cannot result in an incorrect interpretation of the card 
position. 
 

7.4 Command Sequence 

 

Reading of marking measurement values: 

<ESC> # 

Response of the printer e.g.:

 

  25405500<CR>

 

 
2 digits build one measurement-value:   

1. mark = 25    

≅

   5mm 

 

 

 

 

 

 

 

2. mark = 40    

≅

   8mm 

 

 

 

 

 

 

 

3. mark = 55    

≅

   11mm 

 

 

 

 

 

 

 

4. mark = 00    not present 

User Manual 

 

page 36 / 40

 

Содержание CX-one









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды