CLEAR DESIGN BLDLS, Руководство по сборке

Страница: 25 / 44

22
L
-S
H
AP
E
3 | ALIGN AND ATTACH BRACKETS TO SURFACE
Align brackets with the edge of the outside of the surface, then measure 1.25”
between the mounting bracket and front/back of the surface. Insert 4 wood
screws per surface stand.
4 | FLIP AND ALIGN BRACKETS
Flip surface assembly upright, place stands on laminate storage and align
as desired. Once aligned, lift surface upward and off of storage piece. Remove
paper backing from double-sided tape and lower surface back down to allow
tape to stick to top of storage unit.
NOTE: If installing a full width modesty panel, leave additional space between
desktop surface and lateral to accommodate the panel.
1.25
”