CLEAR DESIGN BLADE 120 DEGREE BL-4, Руководство пользователя

Страница: 7 / 24

2 | INSERT BEAM LOCK
Adjust BLADE cable tray to approximate width of surface. Insert
the screw through the overlapping beam slots and into the black
plastic piece. Slightly tighten the screw with only a few turns.
DO
NOT fully tighten.
1 | ATTACH CABLE TRAY HANGERS AND END CAPS*
Align slots on the cable tray and secure with 2 bolts from the
bottom. These hangers will mount to a blade workstation. Insert
Beam Grommet Covers.
*NOTE: End Caps (BTEC) are optional, follow the same install
process with or without end caps.
C
A
B
L
E
T
R
AY
O
P
T
IO
NAL
4