HelixNet v4.2.7.0 Release Notes
Page 5 of 14
This Document Part No.
399G255
Rev
C
*
Muted
permanently mutes the loudspeaker and inhibits the user from turning the speaker on.
*
Unmuted
permanently enables the speaker and inhibits the user from muting the speaker.
*
Unmuted with Headset Control
enables the speaker except when a headset is connected. Once the
headset is connected and detected by the system the Headset key can toggle the speaker on and off
(example: When Headset mic key is off, the speaker is on).
66890 / 66891 Role Feature - Station: HKB Shift Page Options
Behavior of the HKB Shift Page has been updated to be able to be configured for individual stations.
Previously the HKB would automatically shift if a call signal was detected on the second (lower) page to
bring the users attention to the channel in question. Shift Page Options now add a Toggle function where
previously pre-configured Auto-Shift function is disabled and pages are only shifted upon the user
pressing the Shift key.
Shift Key can additionally be Disabled to have no function at all. When disabled any key assignments and
state on the shift page are maintained on the shift page maintaining its usability for forced listens, forced
talks or GPI controlled keysets.
71674 Headset Key Options
Headset (HSet) Key toggles between the microphone input of the headset and gooseneck microphone.
Options have been added to be configurable per HMS, HRM and HKB user station via Local Configuration
or Role. Headset Keys can be forced to be 1) Toggle Latched (Default as today), 2) Permanently Enabled,
3) Disabled, or 4) Non-Latching for use when assigned to a Logic Input / GPI, depending on the behaviour
desired of the user station.
57904 Role Feature - Logic Inputs: Support for HKB-2X-X7 7-pin XLR headset variant with 2 PTT/GPI
Support for new hardware variant of the HKB with 7-pin XLR headset connections with 2 assignable
PTT/GPI connections for accessories. Stations equipped with the 7-pin XLR headset connection can have
their 2 assignable PTT/GPI to any keysets Call or Talk key in addition to Mic On and HSet with the
configured latching/momentary behavior as on the front panel. Separate assignement can be made if
both PTT/GPI (i.e. PTT1+PTT2) of the 7-pin headset connector are made together within 50ms.
67303 System Changes: IP Traffic DSCP QoS tag value change
DSCP QoS tags for HelixNet and LQ audio streams have been changed to simplify users QoS switch
configuration when HelixNet/LQ, AES67 and Dante share network infrastructure. Previously HelixNet/LQ
audio streams used the same tag as PTP in AES67 and audio streams in Dante.
QoS value becomes: Assured Forwarding - AF41.
67665 System Changes: Unique Password refinements
When accessing the devices CCM browser interface using the device unique password the user is now
immediately brought to General - Password section of the CCM along with a prompt encouraging the
user to change the password.
61431 Enhancement: HMS reset options
Available front panel reset options of the HMS-4X have been further expanded to accommodate unique
password requirements and user workflows.
Front panel HMS reset options following this change include;
*
Reset HMS
Resets everything except the CCM password on the HMS
*
Reset Endpoints
Resets all endpoints connected to the HMS
*
Reset CCM Pass
Resets the CCM password to the device unique password
*
Reset Roles/Channels
Reset the roles and channels assignations of the HMS as from CCM
*
Factory Default
Resets everything on the HMS and connected endpoints
