Clear-Com CELLCOM 10, Инструкция по эксплуатации

Страница: 59 / 168

Vitec Group Communications
CellCom-10 Instruction Manual 5 - 3
The AVAILABLE BELTPACKS menu appears, as shown in Figure
5-2. The first page shows the first five beltpack labels.
Figure 5-2: From the AVAILABLE BELTPACKS menu, select a beltpack
• The beltpacks’ generic labels BPK01 through BPK05 appear on
the upper row, while the labels given to the beltpacks appear just
under the generic labels. At first both upper and lower labels will
have the same generic designations.
• To get to the second page, scroll all the way to the right of the
screen, and then continue to scroll. The second page, showing
beltpack labels 6 through 10 (BPK06 through BPK10) appears.
2. Scroll to and select the desired beltpack label.
The next menu that appears gives the options for programming the
selected beltpack, as shown in Figure 5-3.
Figure 5-3: Select LABEL from the PROGRAMMING OPTIONS menu
3. Scroll to and select LABEL from the menu.
A menu to edit the selected beltpack’s label appears, as shown in
Figure 5-4. The current 5-character label appears, just under its
generic name.
Figure 5-4: Editing a Beltpack’s Label
4. Scroll to and select the alphanumeric character to be changed. A
box appears around the character.
5. Rotate the setup/enter knob. As the knob is rotated the entire range
of available characters appears, starting with upper-case
characters, proceeding to lower-case characters, then to digits, and
finally to punctuation characters.
AVAILABLE BELTPACKS
BPKO2
CAMS1
BPKO3
CAMS2
BPKO4
CAMS3 BPKO5
CAMS4
BPKO6
CAMS5
BPKO1
AUDIO
SELECTED BPK01 - BPK01
LVLS KEYS
RGSTR
LABEL GRPS
BPKO1
A U D I O
Port labels identify the
devices wired to the base
station’s rear panel ports.