Clear-Com CELLCOM 10, Инструкция по эксплуатации

Страница: 24 / 168

Vitec Group Communications
CellCom-10 Instruction Manual
1 - 4
Figure 1-3: Configurations for a Studio and Large-Scale Broadcast Facility
Using an antenna splitter allows up to five antennas to be connected to
one base-station antenna port. A single CellCom base station supports
ten beltpacks and up to ten antennas, giving a great deal of flexibility in
placing beltpacks where they are needed most, and for providing
wireless reliability. For added coverage, it is possible to connect a
second CellCom 10 base station to the first. Figure 1-3 illustrates how
a CellCom 10 system can be set up to operate in a single studio or in a
large-scale permanent broadcast facility.
Note: Each antenna is designed to handle five beltpacks
simultaneously in good conditions. However, if interference
or propagation problems occur in an area, to ensure proper
operation and reliability, it may be more practical to install
four beltpacks for each antenna.
For zones which are likely to need coverage for five or more beltpacks
simultaneously it is recommended that a second antenna is installed.
Similarly, for good coverage for nine or more beltpacks simultaneously,
a third antenna may be required.