Clear-Com CELLCOM 10, Инструкция по эксплуатации

Страница: 136 / 168

Vitec Group Communications
CellCom-10 Instruction Manual
1 0 - 8
Figure 10-9: Beltpack Serial Number
This performs two actions - firstly it sends the system number and
DECT carrier mask information to the beltpack, and secondly it stores
the serial number of the beltpack in the base unit configuration.
If the program connects successfully with the beltpack, the "Serial
Num" field will change to show its serial number.
INPUT AND OUTPUT LEVELS
The input level (a biasing factor applied to the audio mix of other users
which adjusts the level at which other users will hear this beltpack) and
the output level (the level at which the beltpack hears other users) can
be adjusted between -20 and +18dB.
PORTS TAB
This allows the user to change the settings of front panel headset,
4-wire and partyline connections.
Figure 10-10: Ports Tab
SELECTING THE PORT TO EDIT
Select which of the audio ports is to be edited using the arrow buttons
next to the right of the label edit box.