Digital Screen
01
02
03
Mode
Strong
Ramp Up
Pulse
Function
Continuous full power
Light gradually ramps up from weak to strong
Light pulses at peak frequency
Initially press the on/off power button to switch the unit on. You can then select the
mode of operation. With the Clear Blue Digi 2.0, you now can select the amount of
working time. Press the time select button “T” and scroll through the options of 5
seconds, 10 seconds, 15 seconds or 20 seconds. During operation, the digital
display will show the time countdown and the unit will also provide an audible beep
after every 5 seconds. You may press the on/off button during operation to
immediately shut off the light.
After three minutes without any operation, the unit switches to standby mode to
conserve the battery. Press the on/off button to turn the unit back on. The Clear
Bluedigi comes with new battery warning indicators to ensure you have the proper
light strength during curing procedures. The digital screen will display LO and the
unit will begin to beep when the battery is low and needs to be placed upon the
base and recharged.
Base:
When inserting the handle into the base, the LED light on the base will indicate the
status of the battery.