Cleantecs SOLA-TECS W BJ 2010 Series, Руководство по эксплуатации

Страница: 50 / 72

50
BA 0304031 R00 2021-01
Working
Pulling the cleaner up
Moving the cleaner to the next module
�
Pull the cleaner back over the edge
of the module until the guide roller [1]
rests on the module again.
�
Pull the cleaner to the upper edge of
the module strip.
In the case of heavy soiling, you may
need to clean a module strip again
before you can move the cleaner to the
next module.
�
Move the cleaner by the width of the
brush roller.
�
Repeat this process until you have
cleaned your surface.
In the case of heavy soiling, it may be
better to move the brush roller by only
half the width. This will increase the
cleaning effect.
Pulling back over the module edge
[1]
Risk of injury when lifting heavy parts
�A
When lifting the machine, make sure
to lift it in an ergonomically correct
way.
This will protect you from injuries caused
by overloading your back.
CAUTION