7
9
Adjust the “filtered water flow amount”.
Please keep the dedicated faucet for water purifier (softener) opened,
and adjust the "filtered water flow amount" with the dedicated stop valve
for water purifier (softener).
3
Extend the clamp and take
it off.
4
Remove the outer tube body.
Pull out the outer tube body from the lid
for outer tube body. And remove the
rubber seal.
5
Replace old cartridge with new one
①
Turn the old cartridge counter-clockwise (left)
and remove it.
②
Turn the new cartridge clockwise (right) more
than 2 revolutions,and
screw in completely
.
Appropriate water flow rate
MP02-1E
About 200 ml/sec
MP02-2E
About 200 ml/sec
MP02-3E
About 200 ml/sec
MP02-4E
About 200 ml/2 sec
MP02-5E
About 200 ml/2 sec
MP02-6E
About 200 ml/2 sec
Old cartridge
New cartridge
Clamp
Outer tube body
Lid for outer tube
If the fastening is not enough,
the cartridge may come off and it
can not work properly.
8
Check there is no leakage around the
clamp.
If there is a leakage, check the setting of the rubber seal
and fasten the handle firmly.
