Cleanmaxx Z 02220, Инструкция по эксплуатации

Страница: 24 / 52

EN 24
Troubleshooting
If the device is not working properly, please check whether you are able to rectify the
problem yourself
fi rst.
Do not attempt to repair a defective device yourself!
Problem Potential cause/solution
The device only
operates slowly or
doesn’t start.
• Is the rechargeable battery empty? Charge it.
The suction power is
weak.
• Is the waste water tank full? Empty the bin.
• Is
the fi lter heavily laden with dirt? Clean it.
• Is the suction opening plugged? Turn off the device and
remove the blockage.
• It is also possible that some particles remain caught in
the carpet fl oor or that they are too large/too heavy for the
device to vacuum up.
The device emits dust
when vacuuming.
• Check whether the waste water tank, insert and fi lter have
been properly inserted and if necessary, adjust their seat-
ing.
No water comes out of
the spray bottle.
• Check whether the spray nozzle is set to Spray or Stream
(see chapter “Cleaning windows and other smooth sur-
faces”).
The control light
doesn’t illuminate
when the device is
connected to the
mains supply.
• Is the charger properly connected with a socket and is the
jack plug connected with the connector jack on the de-
vice?
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
Streaks when cleaning
windows or smooth
surfaces.
• Clean the squeegee lip.
• Rotate the squeegee lip if worn: Pull the squeegee lip to
the side and out of the holder, wet the area near the round-
ed part with water or cleaner and insert it back in the hold-
er the other way round.
• Replace the squeegee lip if necessary: If both edges are
worn after rotating the squeegee lip, a new squeegee lip
is needed. Replace the squeegee lip as described above.
• Check the dosage of the cleaner.
02220_DE-EN-FR-NL_A5_V1.indb 24 02220_DE-EN-FR-NL_A5_V1.indb 24 20.04.2015 15:42:43 20.04.2015 15:42:43