Product Maintenance
Cleaning Side Brush
1, check if side brush is broken or something
is stuck underneath
2,
pull the sidebrush straight up and remove dust and fibers
3, if
a
side brush is curly or deform
ed
,
please replace it
Cleaning 2-in-1 Dust Bin and Filters
Hold the bottom of water tank, and thum press down the botton
to take out of the water tank
Take up the handle of dust bin
Take out of the dust bin
Open the dust bin
Take out of the HEPA and primary filter
Drain the crash in dust bin
Flush the dust bin and primary
filter, use cleaning brush to clean
HEPA filter
Install back the primary filter and
HEPA into the dust bin
Empty and clean dust bin every time when you use it, cleaning steps as below:
Wash the nylon primary filter after every cleaning session (not the HEPA-filter)
Before installing the nylon primary filter make sure it is dry.
HEPA filter should be replaced if it has lost its shape or no longer fit tight against the filter frame.
Recommended changing intervalls for the HEPA filter:
i.Once per month if the robot is vacuuming seven days a week
ii.Every other month if it is used 3-4 days per week
iii.Every four months if used less than once per week.
22
