Cleanmate S 1000, Руководство пользователя

Страница: 16 / 24

Starting Up / Standby / Sleeping / Power Off
a. During robot cleaning, press on main body to enter standby mode.
b. During robot cleaning, press ON/OFF button on remote control to po
-wer off the robot.
Note:
If robot is in sleep mode, press on main body to wake up the robot from sleep
mode, then press again, the robot will start cleaning automatically.
a. Press on main body and hold it for 3 seconds.
b. Robot will automatically enter sleep mode if there is no operation on
robot unit panel and remote control for more than 2 minutes.
About Scheduling
1. Starting up
a. Make sure the power switch is on(The power switch is at the right side
of main body)
b. In standby mode, press on main body or ON/OFF on remote control
to start cleaning.
2. Standby
Standby means robot has its power switch on, waiting for the user's
operation. It can be changed to standby mode by one of the following
methods:
3. Sleep
In sleep mode, the robot can only be waken up from button on main
body or ON/OFF on remote control. In order to save power, you can turn
the robot into sleep mode from standby mode via either of the following
methods:
15 16
You can schedule the robot to start cleaning automatically at a certain
time every day.
Note: The robot can only be set when it is in standby or charging mode.
If the robot is in sleep mode, press on main body or ON/OFF button on
remote control to wake up the robot.
If the robot is in cleaning mode, stop it before scheduling.
Product Operation
How to schedule the robot
1. Schedule on Display Panel on Robot Unit
A. Setting robot current time (Make sure the robot is in standby or power on
status).
a. Immediately press “PLAN” button to start current time setting. the LED
panel will show the current system time.
b. Then the left two numbers on LED panel will flash . The left two
numbers stands for Hour, Press “HOME” to increase hour or “MAX” to
decrease it.
c. Press shift to minute setting mode, the right two numbers stands for
Minute on LED panel will flash. Press “HOME” to increase it or “MAX” to
decrease it..
d. Press button to save the setting, then press “PLAN” to exit (Before
the setting is saved, if press “PLAN” to exit, the current setting will be
invalid).
B. Setting the scheduling time (Make sure the robot is in standby or power
on status)
a. Press “PLAN” and hold it for 3 seconds to start scheduling, then the left
two numbers on LED panel will flash,
b. Press “HOME button to increase hour or “MAX” button to decrease it.
c. Press to enter minute setting mode, the right two numbers on LED
panel will flash, press “HOME” button to increase it or “MAX” button to
decrease it.
d. Press again to save the setting, then press “PLAN” button to exit
(Before the setting is saved, if press “PLAN” to exit, the current setting will
be invalid).
C. Cancel the scheduling
Follow above step B, set the scheduling time to be 00:00 and exit.
Note:
a. For the scheduled cleaning time through robot panel will be caculated
according to robot’s current time. Therefore, please follow step A set the
robot time in accordance with current real time.
b. The robot will automatic start cleaning at the scheduled time every day.
Schedule cleaning need to be reset if the power switch has been turned off.
2.Schedule on Remote Control
A. Schedule cleaning setting
a. Make sure the robot is in standby mode or charging mode. Press “PLAN”
button on remote and hold it for 3 seconds to enter scheduling mode.