It is highly suggested to clean up the Dustbin and the filter after each cleaning cycle. The detailed
cleaning process is illustrated as below.
1. Put the robot on top of waste paper, and press the Dustbin button, remove the Dustbin.
2. Press PUSH button, remove the filter and empty the Dustbin.
3. Take out the filter and clean it with a small brush.
4. Remove the Dustbin and wash with water.
5. Install the filter and Dustbin back to the robot until you hear a click.
Robot Maintenance
Turn off the robot and flip it over. Clean the robot if there is anything jammed at suction nozzle or any
dust or dirt on the sensors.
* Lift the Vacuum Moter
Module/Press the Dustbin
1. Dustbin and Filter
1
2
3
4
1
2
3
1
2
2
1
DO NOT wash the HEPA filter, regular maintenance and replacement is recommended.
2
、
Robot Cleaning
Warning:
Do not wash the
Vacuum Moter Module which
contains eletronics.
17
C L E A N M A T E