CleanCraft ADSG 15, Руководство по эксплуатации

Страница: 15 / 22

Cair, Maintenance, Repair
ADSG 15 | Version 1.03 15
After Operation
Step 1: Turn off the device with the switch off button
(Fig.25).
Fig. 25: switch-OFF button
Step 2: Empty the pressure sprayer completely
Step 3: Clean and dry the battery pressure sprayer after
use and before storage.
If you store the device, remove the battery first.
10 Cair, Maintenance, Repair
Turn off the spray switch and remove the battery before
servicing, cleaning and repairing the unit.
Contact CLEANCRAFT for maintenance and use of ori-
ginal accessories.
Turn the unit off with the OFF switch when:
- Start or stopfails.
- The unit vibrates.
- Pressure fluctuations occur.
- Engine noises occur.
- Fuses blow.
Switch off the power supply immediately and contact
your dealer.
The O-ring and washer are wearing parts. The frequency
of replacement depends on the time of use, the sprays
used and regular cleaning of the pressure sprayer.
If the unit is clogged, loosen the nut on the pipe, check
the pipes and clean them.
10.1 Care by cleaning
The pressure sprayer must always be kept in a clean
condition.
Do not wash the battery pressure sprayer in water.
Do not use aggressive acids, strong bases or flammable
liquids for cleaning.
Disconnect the charger from the power outlet before
cleaning.
ATTENTION!
Many spray liquids will dry out and harden if kept in
the battery pressure sprayer. This can cause a clog-
ging of the nozzle, shut-off valve and tube.
DANGER!
Risk of electric shock!
Remove the battery before servicing, cleaning or
repairing the device.
Protective gloves
Wear suitable protective gloves for cleaning!