•
Your unit was delivered with 10 RFID tags. To utilize
those tags, just peel the backing off the tag, and
affix the tag somewhere on the item that's being
cleaned.
•
The RFID reader is located on the lid of the
OmniClean unit. So, when you open the lid, you just
need to tap the tag onto the inside of the lid for the
tag's unique ID to be read.
•
Once an item has been recognized by the system,
the blue (non-UVC) lights in the lid will blink three
times to let you know the tag was read correctly.
Then just place the item in the drum so it can be
cleaned normally.
•
If you are placing multiple units in the drum to be
cleaned, they can all be tracked independently this
way. Just tap each item on the lid and place it in the
drum after you see the blue lights blink in
recognition.
•
If you are subscribed to the Customer Data Portal,
you will be able to access all historical data for each
Cleanbox unit you own, as well as all the devices that
have been cleaned in those units as long as they
have RFID tags affixed to them.
RFID Tags
6
