Pro-OX 7800 Installation & Startup Guide
Page 11
www.cleanwaterstore.com
Rev 120214
Maintaining Your Birm Filter System
There is little or no maintenance required. Every 6 – 10 years the Birm media can be replaced for best
results.
Troubleshooting the Birm 7800 Iron Filter System
One problem that may occur is if you do not have enough backwash flow rate to properly clean the Birm
filter. You can verify the backwash flow rate by running the drain line into a bucket and timing it when
the 7800 is in backwash.
If you are still getting some iron through the system, you can adjust the filter to backwash every 1 or 2
days.
What to Do If Your Filter Tank Does Not Sit Level on the Floor
Your black filter tank base is not glued to the bottom of your tank. Occasionally tank bases
will become crooked during shipment. If you find that that your tank does not sit level on
the floor, you can easily adjust it by holding the empty tank and rapping it on a concrete or
solid floor once or twice in order to level it.
