7500 Carbon Filter Installation & Startup Guide
Page 8
www.cleanwaterstore.com
Rev 083016
Programming Your Valve:
*IMPORTANT*: Before any operation, the valve menu must be unlocked. If the button
lock indicator is displayed, press and hold both the Up and Down buttons for 5 seconds.
A sound will indicate the menu is unlocked. The menu will re-lock automatically after 1
minute of inactivity.
Digital Display Icons and the four Service Buttons: In addition to the Dynamic Display Stripe
(explained immediately below this) there are six digital icons on the display that will indicate
“where the valve is”. They are as follows:
Green Key Icon: Indicates that the buttons are locked; press and hold both scroll buttons to
unlock.
Blue Clock-face Icon: Indicates that the red digital display is showing the Current Clock Time.
Blue Hourglass Icon: Indicates how many days remaining until the next backwash.
Green Wrench Icon: This indicates that you are in the programming menu and can change the
values.
Red Backwash Icon: three arrows pointing up, underneath a rectangle with dots. This
indicates that you are programming the Backwash step, or that the filter is in backwash.
Red Rapid Rinse Icon: three arrows pointing down, on top of a rectangle with dots. This
indicates that you are programming the Rapid Rinse step, or that the filter is in Rapid Rinse.
Dynamic Display Stripe: On the left side of the digital display, there are seven green bars that
light up and repeat a “going up” pattern. When the valve is in Service Mode, you will see that
bar display flashing. The green Key Icon indicates that the buttons are “locked”. To unlock the
buttons, press and hold both scroll arrows. While locked, the menu also changes, scrolling
between the currant clock time (blue Clock Icon will be lit), the number of days until the next
