5
Usage
Operation
1.
Connect the air cleaner directly to a (wall) socket. The device does not have an power cord
2.
Make sure the filter is correctly positioned and locked in place.
3.
On the side of the air cleaner is a switch that lets you set the following functions:
ION•LAMP
Ionic air cleaning on / LED night light on
LAMP•OFF
Ionic air cleaning on / LED night light off
OFF
Ionic air cleaning off / LED night light off
after switching on you will feel airflow from the vent come out of the front of the unit. This is the fresh
air which is passed along the filter.
Cleaning and maintenance
Cleaning the outside of the device
1.
Switch off the device and pull it out of the (wall) socket.
2.
Use a soft and humid piece of cloth to clean the device.
3.
Make sure that no water gets into the device.
Replacing the electrostatic filter:
1.
Make sure that the device is unplugged.
2.
Replace the filter into the opening of the device.
Warning. Never put the filter back when it is still wet. Let the filter dry for at least 24
hours if you cleaned it with water.
Pulling out and putting back the rustproof electrostatic filter
To pull out the rustproof electrostatic filter:
1.
Switch off the device and pull the plug. Wait for a few minutes.
2.
Pull the filter out of the top of the device
Warning
Do never touch the metal parts of the filter since they could
be loaded electrostatically. Discharge the metal parts before touching
them for example on a heater.
