Clean Air Optima CA-807, Руководство пользователя

Страница: 14 / 25

Notice
14
Operating sensor
●
Steam cannot be seen.
• As it is natural evaporative type without boiling water, the increase cannot be seen.
●
The wind coming from ventilator is not warm.
• As the air taken in during the evaporation gets rid of the heat, the wind coming from
the ventilator is not warm, Depending on the size of the room, it can be felt cold.
●
Rapid humidifying can be set.
• If rapid humidifying is set, humidity can increase by the method of Hybrid.
●
Depending on the temperature or humidity, humidity can be changed.
• In case of high room humidity or low temperature, the humidity can change.
• During the operating Manual Mode, if it operates for over 2 hours at over 70% of
humidity, humidity can be changed into Weak condition and it operates.
(If the humidity is at less than 60% during the operation, it can return to the normal
condition.)
●
Depending on the humidity nearby, it can work automatically.
• During the operation, the sensor can keep the optimal humidity in a mode set by
sensing current humidity nearby.
• Even in the same indoor, the humidity can be displayed differently depending on the temperature difference or air
flow.
• During the initial operation, it can take several minutes to sense the humidity of the near surrounding.
Displaying room humidity
●
It displays the current condition of room
humidity in near surrounding.
●
It can display the humidity measured by humidity sensor in the body frame with 3 colors.
• It can display the humidity with humidity sensor in the body frame;
Orange in dry, Blue in proper humid, White in excessive humid.
- Humidity can be different depending on the place because of
temperature difference and air flow.
- It can be different from that of other humidifiers.
- Shortly after the operation, it can be influence by temperature or
humidity. So it takes a little time for the displaying of humidity to be
stabilized.
Evaporative
humidifying system