Outputs
230 V Output
LPS (230 V OUT) 230V/50Hz Appliances
Connect the Grey Neutrik connector for
the 230 V outlets.
16
LPS
1a Unpacking
1b Mounting
Charging from the van
2a Starter battery
2b Ignition signal
Charging from mains
3 Mains connection
Outputs
4a 12 V Output
4b 230 V Output
5
LPS Remote
6 Test
LPS
Van Installation Guide
Fuses
Both 230 V outputs on the LPS (Schuko on the front, Neutrik in the
back) are protected with 8 A or 10 A relays (depending on model) and
an RCD, which allow you to make fixed 230 V installations in the van.
If an installation is wired around the LPS, separate relays must be
used.
General function
When 230 V In is connected the 230 V power will be looped directly
through the unit.
