IST00W/001
Reflector conversion KIT
03/2018
Page 2 of 3
1. NEEDED MATERIAL
The material required to perform the conversion is:
•
PH2 Phillips screwdriver;
•
T20 Torx key;
Please note names listed here are exclusively descriptive. Generic nuts and screws (including but not
limiting example) may NOT be suitable for use in the fixture. Shall you need additional quantities,
refer to the provided P/N.
2. COVERS REMOVAL
Locate and open the ¼ turn screws keeping the lamp
cap in place, then let it loose on the safety rope (not
shown for clarity).
Remove the 8 screws fixing the back cover as well.
Two screws not shown in the picture.
