manualshive.com logo in svg

Claydon MTB3, Руководство оператора

Поделиться
Скачать
Claydon MTB3 Скачать руководство пользователя страница 20

G

PRE-WORK PREPARATION

20

OPERATORS MANUAL - TERRABLADE

The Claydon Terrastar can be mounted onto any compatible three point linkage with the linkage pins 

supplied.  

Connecting Terrablade  to  the Tractor

1. 

Upper link point

2. 

Upper hitch point

3. 

Lower link point

4. 

Lower hitch point

5. 

Virtual hitch point

1.

2.

3.

4.

5.

Rear Mounting

Once the Terrablade is attached and at the correct working depth, the top link should be set at an angle 

in which the convergence point between the upper and lower link arms should fall at the front axle. This 

can be achieved by altering the top link pin attachment points on the tractor and Terrablade. This ensures 
stability and the mass of the implement is used correctly.

1. 

Upper link point

2. 

Upper hitch point

3. 

Lower link point

4. 

Lower hitch point

1.

3.

4.

Front Mounting

Once the Terrablade is attached and at the correct working depth, the top link should be set at an angle so 
that the upper link point on the Terrablade is higher than the upper link point on the tractor. This can be 

achieved by altering the top link pin attachment points on the tractor and Terrablade. This ensures stability 
and the mass of the implement is used correctly.

2.

Содержание MTB3

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды