Figure 4.1. Blade Ejector Latch Open Position
•
Remove and place each blade in a separate anti-static bag or on a grounded surface. Do
not stack the blades on top of each other. When handling the blades, follow the ESD
precautions described above.
Employ at least two people and use safe lifting precautions to lift the chassis into the rack
and slide it onto the support rails.
2.
Secure the chassis to the rack by its mounting brackets. Refer to the rack's documentation
for information on the appropriate hardware to use.
3.
Verify that the chassis is level and not twisted in the rack. Uneven mounting may cause
difficulties with blade installation and alignment of chassis features.
Chapter 4: Rack Mounting
12
