Clavia nord STAGE, Руководство по обслуживанию

Страница: 9 / 20

Clavia DMI Service manual Nord Stage rev. 1.1 Page 8
Hardware configuration
The Stage model (88, 76, compact) is decided by a jumper on pin header P7
found beside the MIDI connectors.
Hardware version is shown on the Stage display when the unit is started.
If the jumper is not properly configured, you get problems like:
- Low trigging sections on the keyboard.
-Wrong scaling on the keyboard.
Hardware versions
Main board BootPROM Notes
ver. 1.0 v0.52
ver. 1.1 v0.52
ver. 1.2 v1.2 -xx Memory card connector added.
ver. 1.3 v1.3 -xx Memory card connector integrated on main board
ver. 1.4 v1.4 -xx USB communication LED is added.
Hw version is shown in the LCD when you turn on the unit. (ver. 1.2-xx and newer)
i
i i
i
Important note
-Never mount an old BootPROM (prior to 1.2-xx) on a new main board (v1.2 or newer).
-Never mount a new BootPROM (1.2-xx or newer) on an old main board (prior to v1.2).
-The latest available OS version (and piano samples) will work on all officially released
main board versions, however old OS versions might NOT work on newer main boards
Always use the latest OS version!
Jumper configured
as Stage76
Jumper configured
as Stage compact
To set main board
as Stage 88 no
jumper is connected