Clavia Nord Drum, Руководство пользователя

Страница: 9 / 20

ChApter 2 GettiNG stArted | 8 ChApter 2 GettiNG stArted | 9
1
Hold .Shift .and .press .the .Row .Select/Solo .
Edit .to .activate .the .Solo .Edit .mode . .
2
Strike .a .pad .or .use .the .Trig .button .to .hear .
only .the .component .that .is .currently .being .
edited . .
E IfEtheEChannelELevelEparameterEisEselected,EallE
componentsEwillEbeEheard.
3
Press .the .Program .button .to .exit .the .Solo .
and .Edit .mode . .The .LED .will .show .a .P .fol-
lowed .by .a .program .number .
Memory Protect
When .the .Nord .Drum .is .shipped .from .the .factory, .
storing .programs .to .the .memory .is .not .possible .
until .you .turn .off .the .Memory .protection . .This .is .
done .with .one .of .the .System .parameters . .
E M IfEtheEMemoryEProtectEisEOn,EtheEdisplayEwillE
showE“PErEt”EwhenEyouEtryEtoEStoreEaEProgram
1
Hold .Shift .and .press .repeatedly .on .the .Prog .
Dump .button .until .“P .On” .is .shown .in .the .
display .
2
Turn .the .Dial .to .the .“P .Of” .setting . .
This .will .allow .you .to .store .programs .until .this .
parameter .is .set .to .On .again .
3
Exit .the .System .mode .by .pressing .the .Pro-
gram .button . .
Storing
When .a .Program .has .been .changed, .this .is .
indicated .with .a .dot .to .the .right .of .the .program .
number . .
If .you .select .
another .program, .
your .edits .will .
be .lost . .If .you .
want .to .keep .any .
changes .you .have .made, .you .have .to .Store .the .
edited .program . .
1
Hold .Shift .and .press .the .Program/Store .
button .
2
The .display .will .start .to .blink . .
3
Press .Program/Store .again .without .turning .
the .Dial .to .store .the .edited .program .to .the .
current .location . .
Storing to a new location
1
Hold .Shift .and .press .the .Program/Store .but-
ton . .The .display .will .start .to .blink .
2
Use .the .Dial .to .pick .a .location .for .the .new .
Program . .
3
Confirm .your .intentions .by .pressing .Store .a .
second .time . .
This .method .can .also .be .used .to .make .cop-
ies .of .a .Program .