3. usING THe Nord drum 3P | 7
moNo GrouP
The mono Group feature allows you to mute the output of a Channel
by playing on any other Channel in the mono Group, making a group of
Channels behave as one monophonic instrument. This can be used to
silence an open hihat sound on one Channel, by playing a closed hihat
sound on another Channel that is in the mono Group.
Press the
MONO GROUP
button to make the currently selected Channel
part of the mono Group. select another Channel with the CH select
buttons and press mono Group again to add this to the mono Group.
The Channels in the mono Group will be indicated by steady lit green
leds. The mono Group selection will be saved with the drum Kit.
Hold
SHIFT
and the
MONO GROUP
button for one second to
clear an entire Mono Group if there is a selection, or to add
all Channels to a group if none is selected.
edIT all CH
The
EDIT ALL CH
feature is used to make simultaneous parameter edits
on all six Channels. This is useful for setting up any parameters that
should be the same for all Channels and provides a quick method for
applying reverb, delay or any other efffect to the entire drum Kit. When
activated, all Peak/Focus leds will be lit with a fixed light.
When editing the scale Preset parameter for the Tone part, edit all Ch
will automatically be active throughout the operation. read more about
this on page 9.
M
The Edit All Ch state is not saved when storing a Drum Kit.
solo ParT
activate
SOLO PART
to only hear the Part (Noise,
Tone or Click) that is currently being edited. In
addition, the Channel in focus will be soloed in
regard to incoming mIdI notes.
loWer Param
To edit a lower Parameter - written on the sec-
ond row above a parameter button and indicated
by a red label - hold down the
LOWER PARAM
button while operating the dial. another method
for accessing the lower Parameter is to keep the
associated button pressed down while turning the dial.
PaNIC
use
PANIC
to immediately terminate sound on all Channels. This can be
useful if external mIdI input causes notes to hang, or if you during a live
performance quickly want to turn off all currently playing sound.
CHaNNel ParameTers
NoIse ParameTers
The
NOISE
Part consists
of a white noise generator
followed by a dynamic
multimode filter which
shapes the noise spectra.
The filter cutoff frequency
is controlled by a velocity modulated dynamic filter envelope.
RESONANCE
RESONANCE
is used to emphasize frequencies around the filter cutoff
frequency. This can be perceived as making the sound thinner or a bit
“nasal”.
Range:
0-20
FILT TYPE
There are seven filter types -
FILT TYPE
- to choose from: low pass, high
pass and band pass with different slopes. The low pass and high pass
can have a 12 or 24 dB/octave slope, with an additional 24dB/octave
High Cut version of the high pass filter that also dampens the high
frequencies a bit. The band pass can be set to 6 or 12 dB/octave.
a low pass filter dampens the treble, making the sound duller.
High pass cuts the bass frequencies, making the sound brighter.
Band pass dampens frequencies from both the treble and the bass.
FILT TYPE
=
FILT FREQ
=
FILT RES
=
Low pass filter w resonance
18
f c
0
24 dB/oct
freq
gain(dB)
FILT FREQ
=
FILT RES
=
Low pass filter
18
f c
24 dB/oct
12 dB/oct
0
FILT TYPE
=
FILT TYPE
=
freq
gain(dB)
FILT FREQ
=
FILT RES
=
High pass filter
36
f c
24 dB/oct
12 dB/oct
0
FILT TYPE
=
FILT TYPE
=
freq
gain(dB)
FILT FREQ
=
FILT RES
=
Band pass filter
30
f c
0
FILT TYPE
=
FILT TYPE
=
12 dB/oct
6 dB/oct
freq
gain(dB)
Содержание Nord Drum 3P
Страница 20: ......
