First Steps RODEON TurnTable
Please follow the further instructions to install the controlling software „RODEON-
modular“:
1.
Switch on the PDA and, if necessary, proceed the usual procedure (e.g. adjust
ing the touchscreen etc.).
2.
Start the file explorer and change into the directory with the installation files
(if needed, change to „My Device“ and „ROM Storage“ or „Recovery“).
3.
Open installation files in this order:
„CLAUSS_RootCA.cab“ (not available in Windows Mobile 2003)
„RodeonAPI.cab“
„RODEONmodular_GUI.cab“
and follow the instructions
The controlling software is now installed and ready to use.
Please note:
Some types of PDA allow linking the programs by quick buttons.
If this function is not supported, such a linking can be placed on the desktop
for achieving a faster operating principle.
4.
Activate the Bluetooth interface of the PDA (often by clicking on the blue
Bluetooth symbol in the lower right corner of the screen).
5.
By using the Bluetooth manager, search for new devices in the surrounding
(often by using the menu item „New“ and „search for Bluetooth device“). The
RODEON modular must be switched on with the installed antenna in order to
find it as Bluetooth device.
6.
After the device was found, a symbol with the designation „RODEONmodu-
lar“ appears. Please choose this symbol by clicking on it and type in the
pass
word
CLAUSS
(in capitals!) and confirm with Enter/Return.
7.
Please activate „Generic Serial“ and, if necessary, assign port (e.g. COM 9).
8.
Confirm with „ready“ and close the Bluetooth manager. The installation is
now completed.
7
Содержание Rodeon
Страница 1: ...First Steps 12 01 13...
