41001380 Iss 01
4
3. Installation Details
ENSURE AIR OUTLET LOUVRES ARE NEAREST
TO DOOR APPERTURE.
3. Installation Details
3.1 Location
All units should be installed horizontally directly
over the door opening. It is recommended that the
air curtain is installed on the inside of the building,
within the open room space against a wall or
ceiling.
Care must be taken to allow complete free air
movement into the inlet grilles of the unit to ensure
correct working operation of the air curtain. The
discharge opening should be as close to the top of
the door as possible and cover the entire door
width.
Units can be mounted adjacent to each other to
cover the full door opening across wider
entrances.
The weight of the RAC13 heaters is 20kg
3.2 Clearance Distance
It is recommended that a minimum clearance of
55mm is allowed around the case.
The minimum mounting height (floor to grille) is
1.8m. The recommended mounting height is 2.8m.
3.3 Health and Safety
Sole liability rests with the installer to ensure that
all site safety procedures are adhered to during
installation.
Sole liability rests with the installer to ensure that
protective safety wear such as hand, eye, ear and
head protection is used during installation of the
product.
Do not rest anything especially ladders against the
product.
Fig.1 Air discharge
Fig.2 Mounting cut out dimensions
Fig.3 Grille fixing
WARNING:
THIS AIR CURTAIN SHOULD NOT BE
INSTALLED WHERE THERE IS A
CORROSIVE ATMOSPHERE.
