Clatronic HSM/R 3313, Инструкция по эксплуатации

Страница: 27 / 42

7
Charging the Unit
Turn the unit off.
Connect the power adaptor connector with one
of the following jacks.
The socket directly at the bottom end of the
unit.
Alternatively place the unit in the charging
station. The socket is at the rear.
Plug the power adaptor into a 230V/50Hz wall
outlet.
The charge indicator turns on during charging.
Note:
The charge indicator
does not
indicate the
state of charge of the rechargeable battery.
Charge the unit before irst use for 10 hours.
Later charges take 10 hours as well.
Note:
The unit cannot be operated with mains power.
Caution:
After 10 hours always disconnect from mains
power supply.
Note Lifetime Rechargeable Battery
You can extent the lifetime of the rechargeable
battery by following these steps:
Only charge after the battery is nearly
exhausted.
Do not charge for more than 10 hours.
Charge the unit at temperatures between
0° and + 40°C.
Clip and Cut Beard
Select the cutting length with the attachment
comb. Press and slide the button (3).
Slide the switch (4) towards the clipper head:
Start with the longest cutting stage and clip
goatee, sideburns or full beard step by step to
the desired length.
Clip Hair
Select the cutting length with the attachment
comb. Press and slide the button (3).
Slide the switch (4) towards the clipper head:
Start with the longest cutting stage and clip
your hair step by step to the desired length.
Outlining and Shaving the Neck
Remove the attachment comb (1) and slide the
switch (4) towards the clipper head.
•
•
•
•
•
•
•
•
•
•
•
The clipper head allows precise outlining the
shape of the beard, even in dificult to reach
places as well as a clean shaving of the hair-
line at the neck.
Finish Operation
Slide the switch (4) down.
Cleaning and Maintenance
Regular cleaning and maintenance ensures
optimum results and long lifetime.
Turn the unit off and disconnect from mains
power supply, if necessary.
Warning:
Do not submerge the unit in water.
Caution:
Do not use a wire brush or other abrasives.
Do not use sharp or abrasive cleaning
agents.
Use the cleaning brush to remove remaining
hair after use.
Remove the attachment comb (1).
Press the two buttons (2) at the rear of the unit
to fold out the clipper head.
Regularly apply 1 - 2 drops acid-free oil to the
clipper head.
Fold the clipper head back after cleaning until
it locks in place.
Clean the casing with a slightly damp cloth, if
necessary.
Replace the attachment comb.
Noise emission
The workplace-related emission value is less
than 70 dB(A).
Technical Speciications
Model: .............................................HSM/R 3313
Power supply adaptor: ...............230V, 50Hz, 3 W
Output power adaptor: ...............DC 4.5V, 150mA
Protection class power adaptor: ........................ I
Rechargeable battery: ...................1.2V, 800mAh
Run time: ...................................max. 35 minutes
Charging time battery: ........................... 10 hours
Net weight: .............................................0.140 kg
Subject to change without prior notice!
•
•
•
•
•
•
•
•
•
•
HSM-R 3313 final script.indd 27 2009-4-22 17:18:41