Health instructions
•
If you have any concerns about your health you should consult your doctor
before using the device for the first time. This also applies to people with heart
pacemakers, diabetes or other diseases, pregnant women or people with long-
term muscle and/or joint pain. Continuous pain may be a symptom of a serious
disease.
•
A massage should have a pleasant and relaxing effect. If you feel discomfort or
pain after a massage you should consult a doctor before using the device
again.
•
Never use massage machines with open wounds, body parts with circulation
disorders, swellings, burns, inflammations or skin sores or pus wounds.
Use
Footbath
•
Place the appliance on the floor so that you can sit comfortably in front of it.
•
Fill the appliance with warm or cold water up to a maximum of two filling marks
located on the appliance’s inner wall.
•
Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
•
Sit down and put your feet in the appliance.
•
Select the type of operation desired using the remote control.
Infrared
M Warm
Warm
•
By pressing the function buttons on the remote control you can freely combine
the settings, e.g. m warmth with infrared or whirlpool and infrared etc.
The control lamps show the selected functions.
•
Enjoy the deep-penetrating massage while moving your feet forward and back-
ward over the reflex zone massage rollers. The roller plates can be easily remo-
ved by pulling them out. When using the appliance without the roller plates fit in
the standard plate.
•
After use:
You can switch the functions off by pressing the buttons on the remote control
again. When the control lamps have gone off, remove the mains plug.
Pour out the water at the side next to the infrared lamp.
Never pour water over the control lamps.
Attention: The purpose of the heat generated by the appliance is not exclusively
for the warming of the water. It is generated to avoid its rapid cooling.
With the roller insert below the infrared light you can increase the massage effect.
28
GB
5....-05-FMI 2791 28.03.2003 11:19 Uhr Seite 28
